STAB HH-90 SATELLITE DISH ROTOR USALS DiSEqC MOTORIZED H-H MOTOR FOR 90CM DISH

Description

One pc Brand New
STAB HH-90 (Horizon to Horizon) USALS DiSEqC 1.2 Dish Motor for Offset Ku Band FTA Dish - Made in Italy
HH90 STAB Motors - Direct from Italy!   Motorize your 90 cm (36 inch) Ku-Band dish and run it with a FTA Receiver with DiSEqC 1.2 and USALS capabilities. This Horizon-to-Horizon STAB Motor works off of the single coax cable that is used to power the LNBF. This STAB Motor will let you move your Ku-Band dish (Up to 95cm in size and Up to 22 lbs) to different Satellites for MORE FREE TO AIR CHANNELS! These trusted STAB brand motors are the best you can buy! And we have brand new stock, just shipped from STAB in August 2019!
This HH-90 will ONLY fit a dish that requires a standard 42mm diameter motor tube. This includes MOST FTA dish's on the market.  If you are not sure, check before you buy. We will not accept a return for this reason.
FAST FREE Ship
ANYWHERE
in the USA!
AK, GU, HI, PR, USVI, APO, included!
Canada, Worldwide, check shipping details or contact us for a ship quote!
FEATURES:
For all FTA Dishes up to 90cm (36 Inch) that require a standard 42mm tube
For all FTA Receivers that support DiSEqC 1.2, or DiSEqC 1.3 (USALS) protocol
Powered by your FTA Receiver using the coax cable to the LNB
No external power source required
Compact Structure
Ultra Low Noise
Limit Protection
SPECIFICATIONS:
Communication Protocol DiSEqC1.2, USALS
Antenna Maximum Diameter 95 cm (37")
Maximum Antenna Weight 10 kg
Support Pole Diameter 35 ÷ 68 mm
Antenna support length 145 mm (5.5")
Antenna support diameter 42 mm
Rotation Angle ± 65°
Rotation Speed 2.4°/s (18 V); 1.5°/s (13 V)
Work Voltage 13 / 18 Vdc
Stand-by Consumption 40 mA
Work Absorption 180 mA
Max Consumption 350 mA
Operating Temperature -40°C ÷ +80°C
Max Relative Humidity 100%
Settable Positions (DiSEqC1.2) 49 satellites
Preset Positions (DiSEqC1.2) 28 satellites
Settable Positions (USALS) without limits
Connectors F-type
Link coaxial cable
Mechanical Limits ± 70°
Settable Electronic Limits 5° ÷ 65°
Fine Rotation 0.1° impulses
Inclination on the pole 10° ÷ 70°
Weight 2600 g
This HH-90 will ONLY fit a dish that requires a standard 42mm motor tube. If you are not sure, check before you buy. We will not accept a return for this reason.
Thanks for looking and good luck on your auctions!